Tube Cleaner

Directions for Use For best results, use T.C. Washing Machine Tub Cleaner once a month to keep your washing machine clean and free from residue, limescale, and unpleasant odors. 1. Make sure the washing machine is completely empty. 2. Select the Cotton program. 3. Set the temperature to 60°C or 90°C. 4. Start the wash cycle. 5. Once the machine begins filling with water, pour one full bottle of T.C. Washing Machine Tub Cleaner into the detergent drawer. If your washing machine cleans clothes well and only has an unpleasant odor, half a bottle is sufficient. After the Cleaning Cycle - Run the washing machine empty once more on a short cycle (approximately 15–30 minutes) with a small amount of laundry detergent to remove any remaining residue. - Leave the washing machine door open for several hours to allow the interior to dry completely. To Clean the Door Rubber Seal Apply T.C. Washing Machine Tub Cleaner directly to the stained areas or soak a cloth with the product and place it on the affected area. Leave for 6 hours, then wipe clean. To Clean a Dishwasher - Run the dishwasher empty on a cycle of at least 1 hour. - After 5 minutes, carefully open the door, add one cup of T.C. Washing Machine Tub Cleaner, close the door, and allow the cycle to finish. Important Notes - Do not disconnect the power during the cleaning cycle. - If the power is interrupted while the cleaner is inside the machine, drain the water through the drain filter, then add approximately 5 liters of water through the detergent drawer before restarting the cleaning process.